90–9990–192 iWeld Industrial 1902 Series Welding Workstation

I

W E L D Q U I

C K S E T U P G U I

D E

36. Depress the Set Recipe button (yellow button; located in the center of the touch screen). The parameter buttons will all turn green.

37. Without touching the stand, depress the foot pedal to the floor; this will release one laser pulse that will appear on the steel stand.

38. Look through the microscope to reference the pulse spot position and compare with the location of the cross-hair center target. (Figure A) When properly aligned, these will overlap. (Figure B) For alignment and movement instructions, be sure to reference the Optical Alignment Diagram (next page).

Figure A

Figure B

iWeld Industrial 1902 Series – Quick Setup Guide, Rev. A_01-28-22 PN 90–9990–192

© 2022 LaserStar Technologies Corporation. All rights reserved.

W W W .

L A S E R S T A R .

N E T