FiberCube 3400 Series Open Laser Engraving System – Quick Setup Guide

FiberCube QUICK SETUP GUIDE

10. Using scissors or snips, cut the banding straps that secure the laser to the skid base.

11. Have at least two people lift the laser. (NOTE: Be careful not to kink the large fiber wire.)

© 2024 LaserStar Technologies Corporation. All rights reserved.

FiberCube® 3400 Series – Quick Setup Guide, Rev. A_06-03-24

PN 87–9990–558–###

W W W .

LASERSTAR.

N E T