FiberCube 3601 Series Open Laser Engraving System – Quick Setup Guide

FIBERCUBE QUICK SETUP GUIDE

13. Locate the box labeled “accessory kit” and carefully cut and remove the tape.

SETUP

14. Locate and open the box labeled “accessory kit” and retrieve the following items: keys, remote interlock (30 watt model only), power cable, USB hub, and USB cables.

FiberCube ® 3601 Series – Quick Setup Guide, Rev. C_02-10-23 PN 58–9990–558–361

© 2023 LaserStar Technologies Corporation. All rights reserved.

W W W .

LASERSTAR.

N E T