FiberCube 3602 Series Quick Set-Up Guide

F I B E R C U B E Q U I C K S E T U P G U I D E

13. Locate the box labeled “accessory kit” and carefully cut and remove the tape.

SETUP

14. Locate and open the box labeled “accessory kit” and retrieve the following items: keys, remote interlock, power cable, USB hub, and USB cables.

15. Locate the power inlet on the rear of the laser housing and insert the power cable.

FiberCube ® 3602 Series – Quick Setup Guide, Rev. D_01-21-21

PN 58–9990–558–362

© 2021 LaserStar Technologies Corporation. All rights reserved.

W W W .

L A S E R S T A R .

N E T