FiberStar 7601/7601-MFX Series Quick Setup Guide

FIBERSTAR QUICK SETUP GUIDE

17. Make sure that before you start to plug the MFX component to the laser that the mains switch is off. It is located at the bottom of the MFX component.

18. After securing the MFX component, you will now connect all of the wires from the back of machine to the component.All wires have labels that match their corresponding ports. (i.e. HDMI to HDMI)

19. Make sure that when you’re ready to use the machine that you also turn the MFX component on as well.

20. Attach one of the saved palette brackets to the rear left side of the machine and drill another bolt into the floor, using it as a floor mount.

FiberStar ® 7601/7601–MFX Series – Quick Setup Guide, Rev. A_09-29-23 PN 87–9990–558–761MFX

© 2023 LaserStar Technologies Corporation. All rights reserved.

W W W .

LASERSTAR.

N E T