FiberStar 7601/7601-MFX Series Quick Setup Guide

FIBERSTAR QUICK SETUP GUIDE

INSTALLING THE MONITOR (NOTE: Skip to “Final Connections & Power Up” if you did not purchase the MFX Components.) 21. The laser comes equipped with a side monitor. Retrieve the monitor from the accessory kit.The monitor will come assembled.You will need to disassemble the monitor for easier installation.

22. Remove the bolts from the top of the machine besides the mains power switch.Then bolt the monitor’s stand to the machine.

23. Feed the wires from the back of the monitor through the hole on the stand then plug them into the machine. Then bolt the monitor back to the stand.

FiberStar ® 7601/7601–MFX Series – Quick Setup Guide, Rev. A_09-29-23 PN 87–9990–558–761MFX

© 2023 LaserStar Technologies Corporation. All rights reserved.

W W W .

LASERSTAR.

N E T