iWeld 1902-MFX Series Quick Setup Guide

I

W E L D Q U I

C K S E T U P G U I

D E

26. Once it is secure, take the bolts from step 14 and screw them back to the machine through the MFX component’s top metal braces.

27. Make sure that before you start to plug the MFX component to the laser that the mains switch is off for both the machine and the MFX component. It is located at the bottom of the MFX component.

After securing the MFX component, you will now connect all of the wires from the back of machine to the component. All wires have labels that match their corresponding ports. (i.e. HDMI to HDMI)

Make sure that when you’re ready to use the machine that you also turn the MFX component on as well.

iWeld Industrial 1902-MFX Series – Quick Setup Guide, Rev. A_12-22-22 PN 90–9990–192MFX

© 2022 LaserStar Technologies Corporation. All rights reserved.

W W W .

L A S E R S T A R .

N E T